Construction of Polished Porcelain Tile
For a small, poorly lit toilet, does not apply to dark and warm color of the respect of Polished Porcelain Tile. Because the dark respect for the Polished Porcelain Tile make people feel smaller space, the more the room appears to be dark; another warm color of the respect of Polished Porcelain Tile, visually forward feeling, will increase the room's sense of oppression. So this type of room is usually used light and cool color of the respect of Polished Porcelain Tile.
On the contrary, for a large area, good lighting toilet, should mainly consider how to make people feel warm and comfortable in the bath. Therefore, you can use warm color, slightly darker color Polished Porcelain Tile.
Polished Porcelain Tile as the background of sanitary ware, played a role in setting off. So in the color of the brightness, saturation than sanitary ware much lower. Appropriate match, will make clean with a more clean and more beautiful feeling. At the same time respect the Polished Porcelain Tile should be kept in a hue, generally the color of the tiles relative to respect the Polished Porcelain Tile to be deeper. In addition, in different places, should use a different pattern of respect Road Polished Porcelain Tile. The respect of the kitchen Polished Porcelain Tile should be concise and lively, pay attention to the cabinet and cooking table style and color coordination, the pattern should be Simple and generous, people feel clean and clear, appropriate embellishment of a few tiles, choose a larger color contrast graphics, to create a relaxed and pleasant atmosphere.
Round kiln roasting products, the vast majority of brick enterprises using second-order burning production process, but also try to burn a cooking process.
The first time the production process is to cast the Polished Porcelain Tile directly after a code in the wheel kiln, Polished Porcelain Tile drying is in the production process of the kiln, when the polishing tiles in the preheating zone, with the flow through the billet of flue gas Dry. Therefore, a code burning production process, Polished Porcelain Tile drying process is accompanied by the production process with the round kiln carried out.
The Polished Porcelain Tile are prone to severe deformation or cracking due to the fact that the Polished Porcelain Tile are placed directly into the higher billet, as a result of the primary firing process. Also in the roasting process, the preheating zone of the humidity, temperature is difficult to control, seriously affect the quality of preheated drying of Polished Porcelain Tile. Coupled with the wet billet into the kiln affect the firing rate, which also affect the wheel kiln production increased, so the kiln a code burning production process although technically feasible, but the actual operation has some difficulty and so far no Is widely used.
The second stage of the burning process is Polished Porcelain Tile after drying, and then carried out kiln roasting production process. Secondary code burning production process, Polished Porcelain Tile drying method is divided into natural dry and artificial dry two ways.