Home > News > Content

Glazed Polished Porcelain Tile For Daily Maintenance

Jun 28, 2017

Glazed Polished Porcelain Tile for daily maintenance
   In order to ensure the use of Glazed Polished Porcelain Tile and the service life, Glazed Polished Porcelain Tile manufacturers professionals to remind you that attention to its daily maintenance, but in maintenance, there are so few points need attention.
    First, all cast glazed tile surface a little scratches, rubbed in the scratch a little toothpaste, wipe with a soft cotton force, you can also remove some small scratches.
    Second, with soap plus a little ammonia or the same amount of flaxseed turpentine mixture decontamination performance is stronger, can be Glazed Polished Porcelain Tile to wipe more shiny.
    Third, the daily cleaning mopping to try to dry, less wet drag, local dirty or dirt, available household cleaning agents such as: washing powder, detergent, etc., or with decontamination fine cleaning, and according to the use of Regularly coated with anti-fouling wax, the time interval of 3-4 months is appropriate Dry and then polished to keep the brick surface bright as new, economic conditions permitting the use of crystal face treatment, so as to achieve the desired results.
 As Glazed Polished Porcelain Tile strong and durable, feel smooth, soft and bright, so popular in the decoration industry. But want to quickly and effectively pave the way, the relevant Glazed Polished Porcelain Tile manufacturers professionals given the following four paving steps.
    ① the use of organic adhesive paste, cement base bed of ordinary cement its label should not exceed 425 #, 325 # better, pure cement "ash" should be used 275 # white cement.
    (2) The cement mortar bed and the pure cement "ash" coated on the bottom of the brick shall be mixed with the appropriate amount of sawdust (bran) as the tidal sand slurry of the bed and the ratio of cement to sub-ratio is usually 1: 4 -1: 6, when mixed with the amount of sawdust by weight sawdust accounted for 10-15 * × (the rest of the cement dry powder + dry sand), where feasible to try to reach the upper limit of mixing, close to the bottom of the brick pure cement "ash "Thin layer of the incorporation of sawdust weight ratio of 5-7 (the rest of the cement dry powder), where feasible as far as possible to achieve the mix than the upper limit, for the satisfaction of mixing.
    ③ in the order of the next piece of brick in the next piece of brick relative to the placement of a brick without restrictions on the need when the clockwise or counterclockwise rotation 90 degrees, but also 180 degrees, in order to obtain a satisfactory overall color uniformity.
    ④ should be first clean the gap when the gap, and then the four sides of the brick paste color protection, but should pay attention to ensure that paving beautiful, it is recommended to stay 2-3mm brick shop paste, later suggested with the same color US sewing agent For the trench edge of the United States processing, for Glazed Polished Porcelain Tile, is not recommended with a seamless paving method.