Polished Porcelain Tile product advantages
Polished Porcelain Tile is a kind of bright brick, which is a kind of brittle bricks. The Polished Porcelain Tile is much cleaner in terms of the whole body bricks. Polished Porcelain Tile hard wear, suitable for use in most of the interior space except the toilet, kitchen, such as for balconies, facade decoration and so on. Polished Porcelain Tile Advantages:
1, the basic control of no color: natural stone due to diagenetic time, different depth of different layers of color, Polished Porcelain Tile carefully prepared, the same batch of products consistent color, basically no color.
2, no radioactive elements: natural stone is a mineral, without high temperature sintering, it contains individual trace radioactive elements, long-term exposure to the human body harmful; Polished Porcelain Tile will not cause harm to the human body.
Polished Porcelain Tile by thousands of tons of hydraulic press to suppress, and then by 1200 ℃ above the high temperature sintering, high strength, high strength and strength of different natural stone, due to natural formation, material time, weathering, etc., resulting in tightness, The
4, non-slip: ground tiles safe anti-skid is very important, especially the elderly children's family more attention to the anti-skid effect of tiles.
5, brick body thin, light weight: natural stone due to low strength, so the processing thickness of large, cumbersome, increased the weight of the floor building load, the formation of potential threats, rising costs, and increase the transport, paving and other difficulties.
Polished Porcelain Tile effect glaze is different from the infiltration, large particles and other decorative methods, it uses special special frit with the base material after mixing or by special screen printing applied to the brick surface, after burning and produce different colors of particles or pattern Such as decorative effect. Here's a look at the Polished Porcelain Tile paving method.
1, generally we will be paving in the ground before the first test shop, after using the same color number and near code, before using the adjacent color number and size, and color, size, different glass fossil good classification , And then the number will be marked at the brick floor.
2, before paving in the surface before the first drying of some water, and then the mud and sand to 1: 3 ratio of mixed mortar, to about one meter of the wooden base, the mortar thoroughly smooth, then put the line. And then sprinkled with cement on the ground in the construction, the cement powder fiddle evenly, once again sprinkled with a small amount of cement powder to increase the adhesion with the cement slurry.
3, paving the product should be based on the actual situation need to reserve 1-2mm gray stitch, to prevent the adhesive and Polished Porcelain Tile expansion and contraction coefficient is inconsistent with the phenomenon. Paving should be carried out in the base after solidification, in the paving products gently pushed, so that the bottom of the brick and veneer balance, easy to discharge bubbles, and then use the hammer tapping the brick surface, so that the brick can fully eat, so as to avoid Hollowing out.
4, an hour after the product paving we can use the wooden hammer percussion brick, check Polished Porcelain Tile whether the phenomenon of hollowing, if the percussion to hear the "empty" sound of the tiles, the brick must try to re-paving, All bricks are finished 24 hours before walking on top.
Residual pores in the green body: porcelain Polished Porcelain Tile is a variety of grain and grain boundaries, pores, glass phase of the combination. By burning the furnace, the density of the green body is increased, but there is always residual pores in the final product. These closed pores are polished and exposed to the surface of the brick. When the contaminants come into contact with the surface of the Polished Porcelain Tile, some of the contaminants penetrate into the exposed closed pores and form a stain.